Illustrated Physics
physics, drawn
Concept

Eddy current — where it appears

A loop of current induced inside a solid conductor by a changing magnetic flux through it. Eddy currents oppose the change that drives them, so they brake moving magnets and heat metal in a changing field, and they flow within a skin depth of the surface at high frequency.

Named by 2 essays across one field — each of them below, with the objects they name alongside it.

How a field enters a superconductor that pins it. The magnetic field inside a slab of type-II superconductor, against position across its thickness, as an applied field is raised from zero, in units of the full-penetration field H = Jc a. Each line is the profile at an applied field of 0.5 H, 1.0 H, 1.5 H, 2.0 H. The field enters from both faces as a wedge whose slope is the most current the pinned vortices can carry, Jc; at 0.5 H it reaches halfway to the middle, at H* it just reaches the middle, and beyond that the whole slab carries Jc and the profile rides up with the applied field. A type-I superconductor would show no field inside at all, and a normal metal the applied field everywhere.

The field a superconductor keeps after all

A superconductor is famous for throwing magnetic field out, and the experiment that showed it is the one that made superconductivity a state of matter. Most superconductors that are actually used do something closer to the opposite: they let the field in as threads, grip the threads where they are, and keep them when the field is taken away. The result is a slope of field inside the material that is as steep as the grip allows and no steeper, which is all that is needed to explain why such a superconductor has a hysteresis loop, heats up in an alternating field, can hang a magnet underneath itself, and can be made into a magnet stronger than any of iron.

electromagnetism · Superconductivity The resistance a pan offers the coil. The surface resistance — the square root of πfμρ — of five pan materials against frequency, on logarithmic axes, with the band where induction hobs work, 20 to 100 kHz, shaded. All five rise as the square root of the frequency. At 25 kHz carbon steel offers 9.9·10⁻⁴ Ω and ferritic stainless 0.0024 Ω, while austenitic stainless, which is not magnetic, offers 2.7·10⁻⁴ Ω, aluminium 5.1·10⁻⁵ Ω and copper 4.1·10⁻⁵ Ω. For the same coil current the heating goes as this resistance, so steel heats 19 times as hard as aluminium. Matching steel with aluminium by frequency alone would need 377 times the frequency — 9 MHz, where the hob's own electronics and coil would be the problem.

The pan a better conductor will not heat

An induction hob heats a pan with currents the pan carries itself, driven by a field oscillating twenty-five thousand times a second, and it will heat a cast-iron skillet furiously while an aluminium saucepan, which conducts electricity six times better, barely warms. The better conductor is the worse load. What a pan presents to the coil is a surface resistance that goes as the square root of permeability times resistivity, and on that measure iron beats aluminium twenty times over. The same arithmetic explains why kitchen foil on the same hob can catch fire, and why a steel tip heated this way switches itself off at a fixed temperature.

electromagnetism · Induction

Named alongside it

The objects these essays reach for when they reach for this one.

Critical stateCurie temperatureElectromagnetic inductionFlux freezingFlux quantumHysteresisJoule heatingMagnetisationMeissner effectPermeabilityResistivitySkin effect

All concepts