Concept

Meissner effect — where it appears

The expulsion of magnetic field from the interior of a superconductor, whatever the field was when it became superconducting. It applies to the field the carriers feel, which is why a spinning superconductor generates a field of its own.

Named by 4 essays across one field — each of them below, with the objects they name alongside it.

The screening that survives to zero frequency. How far a magnetic field gets into copper against how fast it is changing, drawn beside the London depth of a superconductor with a carrier density of 6.0e+28 per cubic metre. The metal's curve falls as one over the square root of the frequency — measured on the drawn curve as -0.5000 against −½ — and it is a straight line on these axes with no bottom: at a hundred hertz the field reaches nine millimetres in, and at zero frequency it reaches all the way through, because a normal metal screens by dissipating and a steady field dissipates nothing. The superconductor's line is flat at 21.7 nanometres. The frequency does not appear in the expression for it, so there is nothing for it to depend on, and the screening is as complete at zero frequency as at any other. The two lines cross at 9.0e+12 hertz, in the far infrared, and above that the ordinary metal is actually the better screen — which is a useful corrective, because a superconductor's advantage is not that it screens harder but that it does not need the field to be changing. What the picture cannot show is where the flat line stops: above the energy gap the pairs break, the superconductor becomes an ordinary metal, and the flat line turns into a sloping one.

The field that is pushed out

A perfect conductor keeps whatever field was inside it when its resistance vanished. A superconductor expels the field either way, and the difference between remembering and expelling is the experiment that showed superconductivity is a state of matter rather than a very good conductor.

electromagnetism · Superconductivity
Rotation is a magnetic field, and a superconductor cancels it. Magnetic fields along the spin axis inside a spinning metal, in units of 2mω/e, as seen by its electrons in the frame turning with it. In that frame the Coriolis force on an electron is exactly the force a magnetic field of 2mω/e would exert, pointing against the spin for a negative charge (Larmor's theorem). A normal metal spun in no field has no real field inside, and its electrons feel the rotation's equivalent field in full. A superconductor will not let its carriers feel any field in their interior — that is the Meissner effect — so it generates a real field of exactly the same size pointing the other way, and the sum vanishes. The real field is the London moment.

The field a spinning superconductor makes of itself

Spin a lump of superconductor with no magnet anywhere near it, and a magnetic field appears inside it, pointing along the axis of spin: about eleven trillionths of a tesla for every radian per second, the same in lead, niobium or a copper-oxide ceramic. The field is not left over from anything. In a turning frame the Coriolis force on a moving charge is indistinguishable from a magnetic force, a superconductor will not let its carriers feel any field inside it, and so it makes a real field to cancel the one rotation imitates. The size depends on nothing but the carriers' mass and charge, which makes the field a balance for weighing them — and the one time it was read to a part in a hundred thousand, it gave an answer theory has not matched.

electromagnetism · Superconductivity
How a field enters a superconductor that pins it. The magnetic field inside a slab of type-II superconductor, against position across its thickness, as an applied field is raised from zero, in units of the full-penetration field H = Jc a. Each line is the profile at an applied field of 0.5 H, 1.0 H, 1.5 H, 2.0 H. The field enters from both faces as a wedge whose slope is the most current the pinned vortices can carry, Jc; at 0.5 H it reaches halfway to the middle, at H* it just reaches the middle, and beyond that the whole slab carries Jc and the profile rides up with the applied field. A type-I superconductor would show no field inside at all, and a normal metal the applied field everywhere.

The field a superconductor keeps after all

A superconductor is famous for throwing magnetic field out, and the experiment that showed it is the one that made superconductivity a state of matter. Most superconductors that are actually used do something closer to the opposite: they let the field in as threads, grip the threads where they are, and keep them when the field is taken away. The result is a slope of field inside the material that is as steep as the grip allows and no steeper, which is all that is needed to explain why such a superconductor has a hysteresis loop, heats up in an alternating field, can hang a magnet underneath itself, and can be made into a magnet stronger than any of iron.

electromagnetism · Superconductivity
A current limited by the wire's circumference. The largest supercurrent a wire can carry before the field of its own current destroys superconductivity at its surface, Ic = 2πaHc, against the wire's diameter, for lead, mercury and tin at 1.5 K, on logarithmic axes; dashed, a niobium–titanium wire carrying 3,000 A/mm² in a field of 5 tesla, which grows with the cross-section rather than the circumference. A lead wire 1 mm across carries 192 A — 244 A/mm² — and one 1 cm across only ten times as much, at a tenth of the density. Below 81 micrometres lead carries more than niobium–titanium; above it niobium–titanium wins by a factor that grows with the wire, and it does so in a field of 5 tesla, where lead cannot superconduct at all.

The current a superconductor stops with its own field

A superconducting wire has no resistance, so it seems it should carry any current at all. It carries a definite amount and no more, and the amount is set not by the metal's ability to conduct but by the field the current itself makes: when that field at the wire's surface reaches the critical field, superconductivity fails there. The rule makes the largest current proportional to the wire's radius rather than its area, makes a thick wire worse per square millimetre than a thin one, and explains why the first superconducting magnet, wound in 1913, did not work.

electromagnetism · Superconductivity

Named alongside it

The objects these essays reach for when they reach for this one.

SuperconductivityCritical fieldPenetration depthType II superconductorAmpere lawCooper-pairCoriolis forceCritical currentCritical stateEddy currentFlux expulsionFlux freezing

All concepts