Illustrated Physics
physics, drawn
Concept

Tension — where it appears

The pull a string, rod or surface exerts along itself, which is a constraint force rather than a field. It is absent from an equation of motion written in a generalised coordinate and has to be recovered by a multiplier, and its sign is what decides whether a string goes slack.

Named by 4 essays across 3 fields — each of them below, with the objects they name alongside it.

A siphon's pressure, and the 10.09 m it cannot pass. The absolute pressure of the liquid along a siphon, from the upper surface, over the crown, and down to an outlet 1.2 m below the surface, for 4 crown heights. The profile is hydrostatic and depends on nothing but height: the tube's shape, its length and its bore do not appear. At the crown the liquid is below atmospheric pressure by ρg times the lift, and the whole question of how high a siphon can reach is whether that number stays above the liquid's vapour pressure — 2.34 kPa for water at 20 °C, which puts the ceiling at 10.09 m. a 2 m crown sits at 81.7 kPa and holds, a 6 m crown sits at 42.5 kPa and holds, a 9.5 m crown sits at 8.1 kPa and holds, a 11.5 m crown sits at -11.5 kPa and is below the vapour pressure, so it boils. The ceiling is a property of the liquid, not of the mechanism: a degassed liquid that can be pulled into tension has no such limit, and siphons in a vacuum.

The height a siphon cannot pass

A siphon will not lift water more than about ten metres, and the usual explanation for the limit is also given as the explanation for the mechanism. It cannot be both. A siphon runs in a vacuum, with degassed water, over a crown no atmosphere could support.

fluids · Hydrostatics The reaction that reaches zero, and where the bead lets go. The force the sphere pushes back with, in units of the bead's weight, against the angle from the top. It starts at 1.000 and falls, because the speed the bead has gained needs more centripetal force than gravity's component along the radius can supply. At 48.19° it reaches zero, and past that the surface would have to pull inward to keep the bead on it — which a surface cannot do. So the bead leaves there, and the departure angle is a statement about the sign of a constraint force rather than about a speed or a height. The multiplier is what carries that sign: solve the motion in the angle alone and the reaction is absent from every equation, so nothing in the solution knows that the constraint has stopped holding, and the bead is drawn happily circling a sphere it has already left.

The force a coordinate cannot see

Writing a pendulum in terms of its angle is the first good move anybody learns, and it deletes the tension from every equation that follows. The string still breaks. Recovering the force that the clever choice of coordinate threw away turns out to be a computation with a sign in it, and the sign is where the bead leaves the sphere.

mechanics · Least action How much a wrap holds, against how many turns it is. The ratio of the two tensions a rope can hold across, against the number of turns it is wrapped, for coefficients of 0.1, 0.25, 0.5. The axis is logarithmic because the law is exponential, so each line is straight and its slope is the coefficient. At µ = 0.1 one turn multiplies by 1.9, two turns by 4 and three by 7 — so a person pulling with the strength of one arm holds a load that a small crane would be needed to lift. The practical consequence is the one a sailor states as a rule: turns are cheap and each is worth as much as the one before it, which is a statement about a constant factor rather than a constant force.

The part of the wrap that is actually gripping

The capstan equation gives the largest tension ratio a wrap can hold, and almost nothing spends its life at that limit. Below it the wrap divides in two: an idle arc doing nothing at all and an active arc creeping and carrying the whole exponential — and the division explains a belt's speed loss and its squeal.

mechanics · Friction What the plane between them carries. The stress transmitted across the plane halfway between two charges of 10 nC held 1 cm apart, against distance from the axis in units of the half-separation. For two like charges the field on that plane lies entirely in it — checked here rather than assumed — so the plane sees only the pressure across the lines, the stress is negative everywhere, and the two halves are pushed apart. For opposite charges the field on the plane is entirely perpendicular to it, the plane sees only the tension along the lines, the stress is positive, and the halves are pulled together. Faraday's two words for a field line, tension along it and pressure across it, are exactly these two curves; the whole content of the tensor is that they are the same quantity, ε₀E²/2, wearing two signs. The force is what is left after integrating either curve over the plane, and both integrals come to the same magnitude — the Coulomb force — which is the next figure.

The force read off a surface that touches nothing

Draw any closed surface through empty space, measure the field on it, and the sum of one expression over that surface is the total force on everything inside — whatever the contents are, and without knowing anything about them. The expression is Maxwell's stress tensor, and it turns Faraday's guess about tension along a field line into an exact statement.

electromagnetism · Field energy

Named alongside it

The objects these essays reach for when they reach for this one.

Normal forcePressureAtmospheric pressureBifurcationBoundary conditionsCapillarityCavitationCoefficient of frictionConservationConstraintConstraint forceContact area

All concepts