Concept

Conductor — where it appears

A material whose charges move freely, so that in equilibrium its interior holds no field and every excess charge sits on its surface. The interior emptiness is exact and independent of the material, since any residual field would still be driving a current and the state would not be static.

Named by 7 essays across 2 fields — each of them below, with the objects they name alongside it.

A closed surface with the charge inside. Every field line from the enclosed charge crosses the surface exactly once on its way out, so the net flux counts the charge.

Counting what comes out, and never looking inside

Draw any closed surface. The field crossing it depends only on the charge enclosed — not on where that charge sits, not on its shape, not on anything outside.

electromagnetism · Gauss's law

A conductor in a field, with the surface charge solved for. Field lines approaching an isolated conducting cylinder. The surface charge was found by requiring the conductor to be an equipotential, and the lines then end on that charge, meeting the surface at right angles and leaving the interior empty.

The inside of a conductor, where the field is exactly nothing

Put a metal object in any electric field and the field inside it is zero. Not small — zero, by an argument that takes one sentence, and with consequences that reach from lightning to the most precise test of Coulomb's law ever made.

electromagnetism · Conductors

Two plates 0.20 plate-widths apart, with the field traced. The electric field between two oppositely charged plates separated by 0.20 of their own width, traced by following the field of 26 discrete charges on each plate rather than drawn as parallel lines. In the middle the lines are straight and evenly spaced; near the ends they bow outward. The field nine-tenths of the way to the edge is 80 per cent of the field at the centre.

How much charge a shape will hold, before anything is charged

Capacitance is decided by geometry alone. Two pieces of metal have a number attached to them, fixed by their shape and their separation, and it is settled before any charge arrives.

electromagnetism · Conductors

One line, 21 decades of density, and every mirror on it. Plasma frequency against electron density, both logarithmic, with the horizontal rules at frequencies a reader already has a feel for. A wave is reflected by everything to the right of where its own rule meets the line and passes through everything to the left. a fluorescent tube at 1.0e+17 m⁻³ cuts off at 2.84 GHz; ionosphere, D layer at night at 1.0e+8 m⁻³ cuts off at 90 kHz; ionosphere, E layer at 1.0e+11 m⁻³ cuts off at 2.84 MHz; ionosphere, F2 layer at 1.0e+12 m⁻³ cuts off at 8.98 MHz; aluminium's conduction electrons at 1.8e+29 m⁻³ cuts off at 3819.9 THz. So the F2 layer turns back a 1 MHz broadcast and lets a 100 MHz one straight out, which is why one of them is heard across an ocean at night and the other stops at the horizon; and aluminium's cutoff sits in the far ultraviolet, which is why it is a mirror for everything visible and a window above 78 nm. The dependence is a square root, so the line has slope one half: a hundredfold denser plasma reflects only ten times the frequency. Arriving at an angle helps by a factor of sec θ — 1.00 at 0°, 1.15 at 30°, 2.00 at 60° — because only the component of the motion along the density gradient has to be turned round.

The frequency below which nothing gets in

Free charges give a medium a permittivity that is negative, and a negative permittivity is not an absorbing medium — it is one in which no wave exists at all. Below that frequency the reflection is total, exactly rather than nearly, because there is no transmitted wave and nothing to absorb. The same expression puts the number at 9 MHz for the ionosphere and 3.8 PHz for aluminium.

astrophysics · Plasma oscillation $A refraction with no wave in it. Field lines crossing the boundary between two dielectrics whose permittivities differ by a factor of 4, at incidences of 12°, 26°, 40°, 54°, 68°. Nothing is oscillating and nothing is travelling: these are static fields, and the only inputs are that the component of E along the surface is the same on both sides and that the component of D across it is. Dividing one condition by the other gives the ratio of the tangents of the two angles, and it comes out equal to the ratio of the permittivities — measured off the constructed directions as 4.000, 4.000, 4.000, 4.000, 4.000, against 4. The lines bend towards the surface on the side with the larger permittivity, which is the opposite sense from a light ray entering glass, and the chart on the right shows the whole relation: it is a version of Snell's law with the sines replaced by tangents, and there is no speed anywhere in it. Two things follow that are worth carrying. A field line meeting a surface at grazing incidence stays nearly parallel to it whatever the materials, so the ratio matters least where the field is largest along the surface. And in the limit of a very large ratio every line comes out very nearly perpendicular on the low side, which is the electrostatic ancestor of a conductor's boundary condition — a conductor is the ratio taken to infinity.$

A refraction with no wave in it

A field line crossing from one dielectric into another bends, by a law that looks exactly like Snell's with the sines replaced by tangents. Nothing is oscillating, nothing is travelling, and no speed appears anywhere in the derivation — only the two conditions that say what a boundary may and may not do to a field.

electromagnetism · Dielectrics

The outward pull on a charged surface. Electrostatic pressure against the field at a conductor's surface. The quantity is ½ε₀E², the energy density of the field itself, and it is outward whatever the sign of the charge — like charges repel, and a charged surface is trying to fly apart. The factor of a half is the interesting part and is where a first attempt goes wrong: the field is σ/ε₀ outside and zero inside, and the layer of charge feels neither of those but their mean, because no charge exerts a force on itself. 0.5 MV/m gives 1.1 Pa, 1 MV/m gives 4.4 Pa, 2 MV/m gives 17.7 Pa, 3 MV/m gives 39.8 Pa, 5 MV/m gives 110.7 Pa. Those are small pressures — three megavolts per metre is the breakdown field of air and pulls with about a hundredth of an atmosphere — which is why electrostatic forces shape soap films and dust and not much that is stiffer, and why the same pressure set against surface tension has a definite size of drop at which it wins.

The pressure a charge puts on its own metal

Charge on a conductor sits on the surface and tries to leave. The outward pull is half epsilon-nought E squared, the half is because a charge exerts no force on itself, and setting that pull against surface tension gives the largest a charged drop is allowed to be — a number Rayleigh wrote down in 1882 and an industry now depends on.

electromagnetism · Conductors

The resistance that is a length

Two metals touching do not touch over the area they appear to. Current crosses at a few small spots and has to converge into each one, and the resistance of that convergence contains no area and no path length — only the size of the spot, divided into the resistivity.

electromagnetism · Conductors

Named alongside it

The objects these essays reach for when they reach for this one.

Boundary conditions Electric field Equipotential Surface charge Boundary condition Field lines Permittivity Bound charge Capacitance Conductivity Contact Contact area

All concepts