Illustrated Physics
physics, drawn
Concept

Apparent viscosity — where it appears

The viscosity a uniform liquid would need to give the flow actually measured, at the same rate or in the same pipe. For suspensions and non-Newtonian fluids it depends on the conditions of the measurement, such as shear rate or tube diameter.

Named by 2 essays across one field — each of them below, with the objects they name alongside it.

The thickness a paste can hold on a slope. The greatest thickness a yield-stress fluid can rest at without flowing, against the angle of the surface it is resting on, on a logarithmic vertical axis, for four materials. A layer of thickness h puts a shear stress ρgh sin α on its own base; it stays put while that is below the yield stress and flows when it is not, so the critical thickness is τ_y divided by ρg sin α and it depends on nothing else — not on the viscosity, not on how long it is left, not on how it was put there. On a vertical wall the numbers are 1.4 mm of ketchup, 9.2 mm of mayonnaise, 15.7 mm of toothpaste, 15.1 mm of basaltic lava, which is why toothpaste stays on a brush and ketchup does not stay on a plate held up. Read the other way it is a measurement: a lava flow that came to rest 3 centimetres thick on a 30° slope had a yield stress of about 400 pascals, and that is how the rheology of a flow nobody was standing next to is recovered from its shape a thousand years later. The model stops where the layer is thin enough for surface tension to matter and where the material's yield stress depends on how long it has been left alone, which for most of these it does.

The paste that holds up its own hill

Toothpaste stands on a brush and ketchup does not stand on a plate, and the difference is a single number with the units of a pressure. Below it a material does not flow slowly — it does not flow. That threshold turns a rheological property into a length, and the length is why a lava flow's thickness says what the lava was made of.

fluids · Rheology Blood's viscosity, measured in tubes of different sizes. The viscosity of blood at a haematocrit of 45 per cent, as a multiple of the plasma's, measured in glass tubes of each diameter (the fit of Pries and colleagues to many experiments), against the diameter on a logarithmic axis, with the two-layer model of a core inside a cell-free sleeve 2.5 μm thick, the core 4 times as viscous as plasma (dashed). In wide tubes blood is 3.20 times as viscous as plasma. From about half a millimetre down it gets steadily thinner, to 1.25 times at 6.8 μm — about the size of one red cell — and then climbs steeply, to 5.5 at 3 μm, where cells must fold to get through at all. Which viscosity blood has depends on the tube it is in.

The viscosity that belongs to the tube

Measure the viscosity of blood in a wide glass tube and it is about three times that of the plasma it is made from. Measure it in a tube a tenth of a millimetre across and it is lower; in one a hundredth of a millimetre across, lower still, barely more than plasma's. Then, below about six micrometres, it shoots up. The blood has not changed. The red cells push themselves away from the wall and leave a sleeve of plain plasma a few micrometres thick for the rest to slide in, and in a narrow tube that sleeve is a large part of the flow. A viscosity that depends on the pipe is no longer a property of the fluid alone.

fluids · Rheology

Named alongside it

The objects these essays reach for when they reach for this one.

ViscosityBingham plasticBloodConstitutive lawFahraeus lindqvist effectPlug flowPoiseuille flowRheologyShear stressSuspensionThixotropyYield stress

All concepts