Illustrated Physics
physics, drawn
Concept

X-ray optics — where it appears

The focusing and steering of X-rays, whose refractive index in every material is less than one by only about a millionth. Lenses are therefore weak, and most X-ray mirrors work by total external reflection at grazing angles of a fraction of a degree.

Named by 2 essays across one field — each of them below, with the objects they name alongside it.

Rings whose radii go as the square root of their number. A 20-zone plate for 550 nanometres at 200 millimetres, drawn to scale, beside its zone radii against zone number. The outermost is 1.483 millimetres and the innermost 0.332, and the curve is a square root because the radii come from making each zone's extra path exactly half a wavelength longer than the last. The consequence worth noticing is on the drawing rather than in the formula: every ring has the same area, to 0.003 per cent, so each contributes about equally to what arrives on the axis and the rings get thinner outwards to keep it so. Alternate rings are opaque. Half the light is thrown away and the axis gets brighter, because what is thrown away is the half that would have arrived out of phase with the rest.

The lens that is a set of rings

A lens focuses by delaying the light at its centre until every path takes the same time. A zone plate does the opposite: it changes nothing about the light that gets through, and paints out the light that would have arrived out of step. Half the aperture is thrown away and the axis gets brighter, which sounds like a contradiction and is the whole idea.

optics · Diffraction The share of the reflection that stays a mirror. The fraction of the reflected power that goes into the mirror direction rather than being scattered, which falls exponentially with the square of the phase roughness g = 4πσ sin ψ/λ, against the grazing angle on a logarithmic scale, for surfaces whose height varies with a standard deviation σ of 0.05, 0.5 and 5 wavelengths. A surface rough by a twentieth of a wavelength is a good mirror at every angle: 67 per cent at normal incidence. One rough by half a wavelength keeps only 7·10⁻¹⁸ at normal incidence but 74 per cent at 5°. One rough by five wavelengths reflects nothing specularly until the angle is below about 0.9°, where g = 1, and is a mirror below a few tenths of a degree. The angle at which a surface turns from matt to glossy scales as the wavelength over the roughness; no surface is too rough to be a mirror for light that grazes it closely enough.

The rough surface that is a mirror at a glance

A sheet of office paper is matt from above and shines when sighted along its surface. A choppy sea scatters a radar beam from overhead and returns it like a mirror near the horizon. An X-ray mirror polished to a third of a nanometre is still rough to X-rays except at angles below a degree. All three are one rule: two rays reflected from points at different heights differ in path by twice the height times the sine of the grazing angle, so roughness is measured in wavelengths times that sine — and every surface, however rough, is a mirror for light that skims it closely enough.

optics · Refraction

Named alongside it

The objects these essays reach for when they reach for this one.

InterferenceAmplitude modulationApertureChromatic aberrationDiffractionDiffraction orderDiffuse reflectionFocal lengthFresnel zonesGrazing incidenceImagingOptical path

All concepts