Illustrated Physics
physics, drawn
Concept

Thermal noise — where it appears

The random fluctuation every lossy system shows at a nonzero temperature, because the motions that cause its losses also drive it. Its size follows from the temperature and the loss alone, about kT of energy in each mode, and it sets the noise floor of resistors, mirrors, pendulums and detectors.

Named by 2 essays across 2 fields — each of them below, with the objects they name alongside it.

The same thermal motion, spread three ways. How the thermal jiggling of a spring-mounted mass is distributed over frequency, for quality factors 3, 30, 300, with frequency in units of the resonance and the spectrum in units that make the area under each curve its mean-square displacement. All three curves enclose exactly the same area, kT/k — 1.000, 1.000, 1.000 of it in the units drawn — because equipartition fixes the energy in the spring and not how fast it changes. What the damping chooses is where that motion goes: a high Q concentrates it in a peak 100 times taller than the low-Q one, and leaves the rest of the spectrum 100 times quieter at 10 times the resonance frequency.

The noise a high Q moves out of the way

Anything held by a spring at a temperature jiggles, and equipartition says exactly how much: the mean square of its displacement is kT divided by the spring's stiffness, whatever the spring is made of and however it is damped. That looks like a floor no measurement can go below. It is a floor on the total, and the total can be moved. An oscillator with little damping puts almost all of its thermal motion into a narrow peak at its own frequency and leaves every other frequency quiet — which is why the mirrors of gravitational-wave detectors hang from fibres of glass that ring for minutes.

thermodynamics · Equipartition How much of a wave of gravity a bar can catch. A resonant bar's cross-section for gravitational waves, integrated over its resonance, (8/π)(GM/c)(v/c)², against its mass, on logarithmic axes, for sound speeds of 3.0 km/s, 5.4 km/s, 10.0 km/s (aluminium is about 5.4). It is proportional to the mass, which is why the bars weighed tonnes, and to the square of the speed of sound over the speed of light — the bar answers a strain only by being stretched against its own stiffness, and (v/c)² is about 3 × 10⁻¹⁰. Weber's first bar caught 2.3·10⁻²⁵ m² Hz: to absorb a single joule, a burst must carry 4.4·10²⁴ J per square metre per hertz at the bar's frequency. Dots: Weber's bar, and the two cryogenic aluminium bars that ran longest, ALLEGRO in Louisiana and NAUTILUS near Rome.

The bar a wave of gravity barely touches

The first gravitational-wave detectors were tonnes of aluminium, hung in a vacuum and listened to for ringing. A passing wave stretches and squeezes the bar, and the bar can answer only by vibrating against its own stiffness, so the fraction of the wave it catches is set by the speed of sound over the speed of light, squared: about three parts in ten billion. That one ratio explains why the bars had to be enormous and cold, why Joseph Weber's reported detections of 1969 would have required the Galaxy to be converting dozens of suns a day into gravitational waves, and why the waves were finally found by light instead.

astrophysics · Gravitational waves

Named alongside it

The objects these essays reach for when they reach for this one.

Quality factorResonanceBrownian motionCross-sectionDampingEquipartitionFluctuation dissipationGravitational wavesNormal modesSpectral densityStrainTidal force

All concepts