Illustrated Physics
physics, drawn
Concept

Surfactant — where it appears

A substance that collects at an interface and lowers its tension, doing so at concentrations far below anything that changes the bulk liquid. Because it acts only at the surface, a monolayer is enough — and a gradient in its coverage produces a stress that drives flow with no pressure difference behind it.

Named by 3 essays across one field — each of them below, with the objects they name alongside it.

The small bubble empties into the large one. Two soap bubbles of radius 4 mm and 12 mm joined by an open tube. The excess pressure inside each is 4γ/R — 72.8 Pa and 24.3 Pa — so the 4 mm bubble is at the higher pressure and blows itself into the other. The smaller a bubble gets the harder it pushes, so the process runs away rather than settling: there is no equilibrium anywhere except both bubbles equal.

The small bubble blows up the big one

Connect two soap bubbles of different size and the small one empties into the large one. Everybody expects the opposite, and the reason it happens is one equation with a radius in the denominator — which also means the process runs away rather than settling.

fluids · Surface tension Two ways to weaken a surface. Surface tension is a property of a surface rather than a constant of a liquid, and this shows how far it moves. The steep curve is water with ethanol dissolved in it, against ethanol mole fraction, through nine measured points: two per cent of ethanol takes the tension from 72 to 56.4 mN/m, a fall of 22% for a change of composition small enough to taste and not to see. The initial slope is 837 mN/m per unit of mole fraction, because ethanol collects preferentially at the surface and a little of it covers a great deal of area. The gentle line is pure water against temperature, read on the same horizontal axis as degrees rather than fraction: about 0.15 mN/m per degree, so a difference of ten degrees across a surface is worth about a millinewton per metre. Neither dependence would be interesting if surfaces were uniform. What makes them matter is that a difference in tension across a surface is a force along it, and nothing in the liquid prevents such a difference from existing.

The surface that pulls toward the stronger side

Surface tension is usually treated as a constant of a liquid, and it is not — it depends on temperature and on what is dissolved, and a difference in it along a surface is a force along that surface — which drags the liquid underneath and needs no pressure difference at all.

fluids · Surface tension The colours a draining film runs through, and the end of them. The fraction of light a free soap film reflects, against its thickness, at three wavelengths — 450, 550, 620 nm — computed from the sum over multiple reflections rather than from the two-beam approximation. The three curves peak at different thicknesses, which is why a draining film runs through a sequence of colours as it thins. Below about 11 nm every curve is under a tenth of a per cent and the film looks black. At zero thickness the reflectance is exactly zero, checked before the figure is drawn: the two surfaces reflect equally and half a cycle out of step, so a film much thinner than a wavelength cancels itself. That is the whole of why a black film is black. Nothing is absorbing; the film is there and has simply stopped being able to interfere constructively at any visible wavelength — which means the blackness is a measurement, and a film that has gone black is known to be thinner than about a tenth of a wavelength without anything being measured directly.

The film that goes black before it bursts

A soap film drains, runs through every interference colour, and then stops reflecting anything at all. The black patch is not a hole and not a film about to break: it is the thinnest and most stable state the arrangement has, held apart by a pressure between its two surfaces that only exists at distances of nanometres.

fluids · Surface tension

Named alongside it

The objects these essays reach for when they reach for this one.

Surface tensionWettingBoundary conditionCapillary pressureCavitationCurvatureDiffusionDisjoining pressureDrainageEquilibriumEvaporationGradient

All concepts