Illustrated Physics
physics, drawn
Concept

Kinoform — where it appears

An optical element that shapes a wavefront with a surface relief cut back by one wavelength of delay wherever it would grow deeper. A lens or prism becomes a set of thin zones that works by diffraction, and so works perfectly only at the wavelength its zone height was cut for.

Named by 2 essays across one field — each of them below, with the objects they name alongside it.

A lens with its glass taken out, focusing the same. Two lenses of focal length 200 mm and aperture 100 mm in acrylic (n = 1.49), each with its flat face to a parallel beam and the exact aspheric curve that sends every ray to one focus: solid (top), 12.2 mm thick at the centre, and the same curve cut into 13 rings 1 mm deep with the glass between them removed (bottom), on a backing 0.4 mm thick. Thickness is drawn six times larger than height, and the distance to the focus is not to scale. Every ray leaves each lens at the same angle from the same height, because the angle a ray turns through at a surface depends only on the slope of the surface where it crosses, and every ring keeps the slope it had. What was removed was glass the rays travelled through without turning.

The lens with its glass taken out

Snell's law turns a ray at a surface by an angle set by the slope of the surface where the ray crosses, and the glass behind the surface does not enter it. So a lens can be sliced into rings, the glass between the slopes thrown away, and the rays will not notice. Fresnel did it for lighthouses in 1822. The waves notice — every step cuts a few hundred wavelengths out of them — unless the steps are made exactly one wavelength deep, and then the lens becomes something else: a diffractive element whose colours run backwards, and which can cancel a glass lens's colour with a twentieth of its power.

optics · Refraction How long a lens must hold back its central light. The time by which a lens must delay light passing through its centre relative to light passing its edge, so that every part of a short pulse reaches the focus together, against the lens's radius, for focal lengths of 0.1 mm, 1.0 mm, 10.0 mm (solid), in femtoseconds on logarithmic axes: the extra path from the edge, √(R² + f²) − f, over c. The dashed line is what a flat structure 1 μm thick can supply if its building blocks span a group index of 1: 3.3 fs. A 1 mm focal-length lens reaches it at a radius of 45 μm; a 10 mm one at 141 μm. A glass lens of 10 mm focal length and 5 mm radius holds its centre back by 3937 fs, which it does by being 2.27 mm thicker in the middle. A flat lens has no room for that.

The delay a flat lens has no room for

A glass lens is thick in the middle for a reason that is easy to miss. To focus light of every colour at one point, a lens must do more than bend each colour by the right amount: it must make every part of a light wave arrive at the focus at the same moment, and the light passing the edge has further to go. The glass in the middle is what holds the central light back to wait for it. A lens made flat — a kinoform, a metasurface a micrometre thick — has nowhere to keep that delay. The geometry of the focus sets how much delay is needed, the thickness sets how much is available, and between them they cap how large an achromatic flat lens can be: tens of micrometres, not centimetres.

optics · Refraction

Named alongside it

The objects these essays reach for when they reach for this one.

Chromatic aberrationDispersionAbbe numberAchromatic lensDiffraction gratingFermat's principleFresnel lensGroup delayMetalensNumerical apertureRefractionSnell's law

All concepts