Illustrated Physics
physics, drawn
Concept

Townsend avalanche — where it appears

The multiplication of free electrons in a gas when each, driven by an electric field, ionises a molecule and frees another. Such avalanches underlie sparks, corona and gas-filled particle detectors, and a gas breaks down when each avalanche replaces itself through the electrons its ions free at the cathode.

Named by 2 essays across one field — each of them below, with the objects they name alongside it.

The voltage a gas gap can hold, on one curve. The breakdown voltage of a gap in air between flat electrodes against the product of pressure and gap width, on logarithmic scales — Paschen's law, in which pressure and gap enter only as their product because both count how many collisions an electron makes on the way across. Townsend's model, with γ = 0.01 electrons freed per ion at the cathode, has its minimum of 305 V at 1.12 Pa·m — a gap of 11 μm at atmospheric pressure, or 112 Pa across a centimetre. Measured minima in air are about 330 V. To the left the gap is too short, or the gas too thin, for an electron to make enough collisions, and the voltage climbs steeply; below about 0.41 Pa·m there is no gas breakdown at any voltage. To the right, collisions are so frequent that an electron gains too little energy between them, and the voltage rises nearly in proportion to pd. Dashed, the empirical law for air at larger pd: 31.4 kV for a centimetre at one atmosphere, against the model's 35.5.

The spark that needs room to start

Air is an excellent insulator until it is not, and the usual statement of when — three megavolts a metre — is true only for gaps of about a centimetre. A gap breaks down when one electron's avalanche of ionisation sends back enough ions to the cathode to free one more electron, and that condition depends on the pressure and the gap only through their product. The result is a curve with a floor: about 330 volts in air, below which no gap of any width will spark, and above which both a thinner gas and a denser one insulate better.

electromagnetism · Dielectrics The field round a thin wire. The electric field against distance from the axis, on a logarithmic axis, for a wire inside a coaxial cylinder of radius 10 cm at 60 kV, for wire radii of 0.2, 1 and 5 mm; the dashed line is 30 kV/cm, the field at which air breaks down across a gap of a few centimetres, and each curve starts at its wire's surface. The field falls as 1/ρ, so it is concentrated at a thin wire: 483 kV/cm at the surface of the 0.2 mm wire, 130 at the 1 mm wire and 40.1 at the 5 mm one. The field exceeds 30 kV/cm only within 3.2 mm of the axis for the thinnest wire, 4.3 mm for the middle one and 6.7 mm for the thickest; across the remaining nine centimetres the air is far below breakdown, so ionisation can start at the wire and has nowhere to go.

The glow a thin wire wears before it sparks

Raise the voltage on a thin wire inside a metal tube and, long before anything sparks across, the wire starts to glow faintly violet and to hiss. The air right next to it is ionising, and the air a millimetre further out is not. The field round a wire falls away so fast that an avalanche of ionisation can start at the surface and find nowhere to go. That partial breakdown, corona, costs power lines energy in the rain, sets the size of the wires they are made from, cleans the smoke from chimneys and counts particles in detectors — and the field it needs is not a property of air but of the wire's radius.

electromagnetism · Dielectrics

Named alongside it

The objects these essays reach for when they reach for this one.

Dielectric breakdownElectric fieldIonisationCoaxial lineCorona dischargeElectrostatic precipitatorMean free pathPaschen lawSecondary emissionSimilarity lawTransmission line

All concepts