Illustrated Physics
physics, drawn
Concept

Standard atmosphere — where it appears

An agreed model of how the air's pressure, temperature and density change with height, starting from 101,325 Pa and 15 °C at sea level. Altimeters, aircraft performance figures and balloon calculations are referred to it, so that numbers measured on different days can be compared.

Named by 2 essays across one field — each of them below, with the objects they name alongside it.

The lift of a zero-pressure balloon as it climbs. The gross lift, in tonnes, of a zero-pressure balloon whose envelope holds at most 1.1 million cubic metres, against height, for launches with 3,500 and 5,000 cubic metres of helium; the dashed line is its 3 tonnes of envelope, payload and ballast. At launch the envelope is mostly empty. As the balloon climbs the gas expands exactly as fast as the air thins, so the mass of air it displaces stays the same and the lift stays at 3.69 or 5.28 tonnes all the way up. The envelope fills at 37.5 km with the larger fill and 39.9 km with the smaller; above that, gas vents through the open base, the volume is fixed and the lift falls with the air's density. Both reach the same float, 41.3 km, where the lift has fallen to the weight. More helium only makes the climb faster; the ceiling is set by the envelope's size and the mass it carries.

The balloon that floats at a density

A helium balloon let go rises until something stops it, and what stops it depends entirely on how it is built. A party balloon or a weather balloon stretches until it bursts. An open-bottomed science balloon climbs at constant lift — its gas expanding exactly as fast as the air thins — until its envelope is full, then floats where the air is thin enough. A sealed, unstretchable balloon floats where its whole density equals the air's and bobs back if pushed away. None of them floats at a height; each floats at a density. The difference between the three is how compressible the balloon is compared with the air around it, the same comparison that decides whether a Cartesian diver sinks.

fluids · Buoyancy The height at which hot air stops being light enough. Lift per cubic metre of hot air against height in the standard atmosphere, with the inside at 100 °C and 120 °C, and (dashed) what a 2800 m³ balloon carrying 550 kg plus its envelope needs per cubic metre, 0.241 kg. As the balloon climbs, the outside air thins, and although it also cools — which improves the temperature ratio — the density wins: lift per cubic metre falls by about a tenth for every kilometre. The balloon can climb only to where the curve crosses its need: 6.0 km with the envelope at 120 °C. Above the tropopause the outside temperature stops falling and the lift falls faster still; a hot-air balloon that reaches the stratosphere needs an envelope enormous compared with its load.

The balloon a cold morning lifts

A hot-air balloon is open at the bottom, so the air inside is at the same pressure as the air outside and lighter only because it is hotter. Its lift is the outside air's density times one minus the ratio of the two absolute temperatures — a small number, a third of a kilogram per cubic metre at best — and since the fabric cannot be heated much above a hundred degrees, the lift depends as much on the cold outside as on the heat inside. That is why balloons are the size of houses, why they fly at dawn, why each has a ceiling, and why the pilot must burn for where the balloon will be half a minute from now.

fluids · Buoyancy

Named alongside it

The objects these essays reach for when they reach for this one.

Archimedes principleBuoyancyThe ideal gas lawCompressibilityDensityHeat-transferHeliumLapse rateScale heightStabilityTime constant

All concepts