Concept

Random phase — where it appears

A phase that changes unpredictably, or is spread evenly over all angles, so that averaging over it washes out any interference term. Adding many waves of random phase gives speckle, and a phase that wanders at random in time gives a spectral line its width, as in a laser.

Named by 2 essays across one field — each of them below, with the objects they name alongside it.

A grain that is not on the object. A speckle pattern, computed as the far field of a circular aperture 421 samples in area filled with random phases — which is what a rough surface does to coherent light, and nothing else. The texture is not a picture of the surface: change the phases and the grains move, but their size and their statistics do not. Five shades are drawn here, from the darkest fifth of the range to the brightest. The measured contrast — the standard deviation of the intensity divided by its mean — is 1.0101, against exactly one for a fully developed speckle, and that is a strong statement: it says the most likely intensity anywhere in this pattern is zero, and that the bright grains are as far above the mean as the dark ones are below. Anybody who has pointed a laser at a wall has seen this and most take it for a property of the wall. It is a property of the light and of the aperture looking at it — including, when the aperture is an eye, of the pupil, which is why the pattern swims when the head moves and why its grain size tells an optometrist about the eye rather than about the wall.

The grain that is in the light

Point a laser at a wall and the wall appears to be covered in a fine boiling texture. Nothing on the wall is that size and nothing about the wall decides it: the grain belongs to the aperture looking at it, the statistics are the same for every rough surface there is, and the most likely brightness anywhere in the pattern is zero.

optics · Coherence $How narrow a laser's line can be, against its power. The Schawlow–Townes limit on linewidth, πhνΓ²n/P with Γ the cavity linewidth and n the inversion factor, against output power on logarithmic axes, for a helium–neon laser with a 30 cm cavity of finesse about 300 (Γ = 1.6 MHz) and for a semiconductor laser a third of a millimetre long (Γ about 30 GHz, n = 2), the latter also with Henry's linewidth enhancement 1 + α² for α = 4 (dashed). At a milliwatt the helium–neon laser's limit is 0.0025 Hz — millihertz, a coherence length of tens of millions of kilometres — and the semiconductor laser's 7.2·10⁵ Hz, 1.2·10⁷ Hz with the enhancement. Both fall in proportion to one over the power: more photons in the mode make each spontaneous kick a smaller fraction of the field. The square of the cavity linewidth is why a short, lossy diode cavity has a line ten billion times broader.$

The width a perfect laser still has

A laser's light is the nearest thing to a single pure frequency that anything makes, and it is still not one. Every photon spontaneously emitted into the lasing mode adds a kick of random phase, and because nothing in a laser cares what its phase is, nothing pulls the phase back: it wanders, and a wandering phase is a line of finite width. Schawlow and Townes worked out how wide in 1958, before any laser had been built. For a milliwatt helium–neon laser the answer is a few thousandths of a hertz, a coherence length a quarter of the way to the Sun — and no real laser of that kind has ever come close, because mirrors move. For a semiconductor laser the answer is megahertz, and the measured lines were wider still, by a factor nobody expected.

optics · Coherence

Named alongside it

The objects these essays reach for when they reach for this one.

Coherence Aperture Autocorrelation Circular gaussian Coherence length Contrast Diffraction Heterodyne Interference Laser Linewidth Negative exponential

All concepts