Illustrated Physics
physics, drawn
Concept

Moment arm — where it appears

The perpendicular distance from a pivot to the line of a force, which is what turns a force into a torque. Because only the perpendicular part counts, a force directed through the pivot has no effect however large it is, and moving a force along its own line changes nothing.

Named by 3 essays across 2 fields — each of them below, with the objects they name alongside it.

The same 120 N force at 3 different arms. 3 spanners of different lengths, each with the same 120 newton force applied at its end. The torque printed under each is the force times its own moment arm, so it rises with the length while the force does not change.

The same push, further out, and why that is a different quantity

A force is not enough to say whether something turns. What decides is where the line of the force passes, and the distance from the pivot to that line is the whole of the story.

mechanics · Rotation Which failure comes first. The dividing line between a block that slides and one that tips over, for a horizontal push applied at the top. Sliding needs a force of μ_s times the weight; tipping needs the push's moment about the leading bottom edge to beat the weight's, which is the weight times half the width. The weight appears in both and cancels, so the boundary is the curve aspect ratio = 1/2μ_s and nothing else: not the mass, not how hard the block is pushed, and not what it is made of except through μ. At μ_s = 0.5 the dividing shape is as tall as it is wide; at μ_s = 0.2 it is 2.5 times as tall. Of the 5 objects marked, 3 sit above the line and go over rather than sliding: a paperback, standing, a full filing cabinet, a pint glass.

Slide or topple

Push a wardrobe and it goes over; push a brick and it skids. Both are held by the same friction and both are pushed by the same hand, and which of the two failures arrives first has nothing to do with how hard the push is. The floor decides it, by shifting where it pushes back.

mechanics · Free-body A torque, and no force at all. A loop of 1 turn enclosing 20 cm² and carrying 10 A has a magnetic moment of 0.02 A m². In a uniform field of 0.05 T the torque on it is m B sin θ, drawn here against the angle between the moment and the field: zero when they are aligned, largest at 0.001 N m across, and zero again when they are opposed. The second curve is the energy, −m·B, whose minimum is the aligned position and whose maximum is the opposed one — which is why a compass needle settles one way round and not the other. The net force is zero at every angle on this axis, exactly and not approximately: the force is I dl × B summed round the loop, the sum of dl round any closed path is zero, and a constant B comes outside the sum. The inset shows the four forces on a rectangular loop; the pair across the axis is the couple, and the pair along it cancels.

The loop that behaves like a needle

Far enough away, a current going round in a circle is indistinguishable from a bar magnet, and one number describes both. That number tells a uniform field how to turn the loop and gives it no way to pull on it at all — which is why two magnets attract by the fourth power of the distance and not the second.

electromagnetism · Magnetism

Named alongside it

The objects these essays reach for when they reach for this one.

TorqueEquilibriumFree-body diagramCentre of gravityCentre of massCentre of pressureCoefficient of frictionContact areaDipole radiationFalloff exponentGradientThe Lorentz force

All concepts