Illustrated Physics
physics, drawn
Concept

Angle of repose — where it appears

The steepest slope a heap of loose grains will hold, which for a cohesionless material is the arctangent of the friction between its grains. The thickness of the surface layer cancels out of the criterion, so the answer is an angle rather than a length and a sand pile on the Moon stands as steeply as one on Earth.

Named by 2 essays across one field — each of them below, with the objects they name alongside it.

The stress that stops growing with depth. Vertical stress against depth in a silo of radius 0.5 m holding grain of bulk density 1500 kg/m³, with a wall friction coefficient of 0.5 and Janssen's ratio K = 0.5. The straight line is what a liquid of the same density would do — ρgz, with no length in it anywhere. The curve is what grains do: wall friction, mobilised by the sideways stress the grains themselves exert, removes weight from the column at a rate proportional to the stress, so the stress saturates at ρgλ over a screening length λ = R/2μK = 1.00 m. Read off the drawn curve at the 8 m base, the stress is 14.7 kPa against the 117.7 kPa the liquid delivers — 88 per cent of the weight is standing on the walls. Another twenty metres of grain would move the floor's reading by less than a pascal.

The silo that does not weigh what it holds

Pour water into a tall vessel and the pressure at the bottom is the depth times the density times g, whatever the shape above it. Pour grain in and the floor stops learning anything new after the first couple of metres, because the walls have quietly taken the rest — and the length over which they take it contains no property of the grain at all.

fluids · Granular matter The slope a heap of grains settles at. The steepest slope a cohesionless heap can hold, against the friction between its grains. A slab of thickness h on a slope is pushed down it by the weight's along-slope component and held by friction acting on the weight's across-slope component, and both are proportional to the same ρgh — so the thickness cancels and the criterion is tan θ = μ. Checked here at thicknesses of 2 mm, 50 mm, 2000 mm, the ratio of driving to holding stress differs by 2.2e-16, which is zero. That is why the quantity is an angle: nothing about the size of the pile, the size of the grains, the density or the strength of gravity survives into it, and a heap of sand on the Moon stands at the same slope as one on Earth. The marked materials are glass beads at 24°, dry sand at 33°, crushed gravel at 40°. The band between the two curves is the hysteresis: a slope steeper than 31.0° will keep flowing once started, and one shallower than 35.0° will not start — so a pile has a range of stable angles rather than one, and which it is found at depends on how it was built.

The angle that does not know the size of the heap

Pour sand and it makes a cone with a definite slope, and pouring more makes a larger cone with the same slope. The reason the answer is an angle rather than a length is a cancellation — the force pulling a surface layer downhill and the friction holding it back are both proportional to its weight, so everything about the size of the pile divides out — and everything that puts a length back in is a story about cohesion.

fluids · Granular matter

Named alongside it

The objects these essays reach for when they reach for this one.

FrictionGranular matterCohesionConservationDilatancyForce-chainForce chainsHydrostatic pressureInternal frictionScreening lengthShear strengthStick-slip

All concepts